EnglishFrenchGermanItalianRussianSpanish

Kazakhstan furosemide-type fiber optic junction box AH005

Kazakhstan furosemide-type fiber optic junction box AH005's Installation Manual is suit for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.

Tags: , , , ,
General Details
Kazakhstan furosemide-type fiber optic junction box AH005’s Installation Manual is suit for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.

The scope of application is: aerial, underground, wall-mounting, duct-mounting, handhole-mounting. The ambient temperature ranges from -40℃ to +65℃.

Basic structure and configuration

1 Dimension and capacity

Outside dimension (LxWxH) 396x200x126 (mm)
Weight (excluding outside box) 2500g-2700g
Number of inlet/outlet ports 3 (pieces) on each side (total 6 pieces)
Diameter of fiber cable Φ7—Φ20 (mm)
Capacity of FOSC Bunchy: 12—96 (Cores)

Ribbon: max. 144(Cores)

2 Main components

No. Name of components  Quantity  Usage Remarks
1 Housing 1 set Protecting fiber cable splices in whole Internal diameter:

330x120x110 (mm)

2 Insert plate 1 pairs Fixing the housing 175x56x30(mm)
3 Fiber optic splice tray

(FOST)

max. 6 pcs (bunchy)

max. 4pcs  (ribbon)

Fixing heat shrinkable protective sleeve and holding fibers Suitable for:

Bunchy:12,24(cores) Ribbon:3 (pieces)

4 Foundation 1 set Fixing reinforced core of fiber- cable and FOST
5 Seal fitting 1 set Sealing between FOSC cover and FOSC bottom
6 Port plug 6 pieces Sealing empty ports
7 Pressure

testing valve

1 set After injecting air, it is used for pressure testing and sealing testing Configuration as per requirement
8 Earthing deriving device 1 set Deriving metallic components of fiber cable in FOSC for earthing connection Configuration as per requirement

3 Main accessories and special tools 

No. Name of accessories Quantity Usage Remarks
1 Heat shrinkable protective sleeve Protecting fiber splices Configuration as per capacity
2 Nylon tie Fixing fiber with protective coat Configuration as per capacity
3 Insulation tape 1 roll Enlarging diameter of fiber  cable for easy fixing
4 Seal tape 1 roll Enlarging diameter of fiber  cable which fits in with seal fitting Configuration as per specification
5 Hanging hook 1 set For aerial use
6 Earthing wire 1 piece Putting through between earthing devices
7 Abrasive cloth 1 piece Scratching fiber cable
8 Labeling paper 1 piece Labeling fiber
9 Special wrench 3 pieces Fixing bolts, tightening nut of reinforced core
10 Measuring paper 1 piece To measure circle, of which its diameter is enlarged with seal tape
11 Buffer tube

 

to be decided by customers Hitched to fibers and fixed with FOST, managing buffer Configuration as per requirement
12 Desiccant 1 bag Put into FOSC before sealing for desiccating air.
Order Inquiry

We will contact you soon

  • 8 + 10 =
Comments

Leave a Reply

Your email address will not be published. Required fields are marked *