SC/UPC Boot 4.1mm Fiber Optic Connector

We offers the SC/UPC Boot 4.1mm  Fiber Optic Connector, this SC Connector are fully compliant to the TIA/EIA-568A and Fibre Channel standards.

The SC Fiber Optic Connector can be supplied as a pre-assembled one-piece connector or as connector kits. Clips are available for sc duplex connectors housing kits without ferrule are available.PC and APC are availble. Most fo the SC connectors are found on many equipment and cable assemblies. they features is easy operation, good accuracy and low cost. and with a drawing for the simplex SC fiber optic connector.

The SC connector is square shape design, with push-pull latching mechanism, its keyed, molded housing provide optimum protection. SC fiber connector adopt 2.5mm ceramic ferrule. SC fiber products are available by both single mode and multimode versions, single mode SC have two types, one is SC UPC and the other is SC APC, multimode only has SC UPC connectors. According to the industrial practice. Each type has duplex models.

1. Application

• telephone company central offices
• installations on customer premises
• outside plant applications to connect equipment and cables
• cross-connect cables
• Datacom and telecom;
• GPON;EPON;GBIC

2. Features

• Ultra Low insertion and back reflection
• RoHS compliant
• High return loss (lowamounts of reflection at the interface)
• Ease of installation
• Low cost
• Reliability
• Low environmental sensitivity
• Ease of use

3. Compliance

• IEC60B74-14;FOCIS-3;TIA/EIA-604-3A;
• UL94 V-0 rated plastic housing or metal housings available
• Telcordia GR-326-4 CORE Compliance

4. Specification

SPECIFICATION	Single Mode	Multi Mode
Insertion Loss	Typical≤0.15dB,Max≤0.25dB	Typical≤0.2dB,Max≤0.3dB
Return Loss	PC/UPC≥50dB,APC≥65dB	N/A
Durability	＜0.2dB Typical change,500 matings
Operating Temperature: -40 ℃ to + 75℃

5. Ferrule

SC/FC APC SM APC ZIRCONIA FERRULE SC-APC and FC-APC
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron	Length Tolerance(No flange): 10.5 ±0.05mm	V-GROOVE: 60/90 ±5 degrees
Concentricity(standard):singlemode≤ 1 micron	Outer Diameter Tolerance: Singlemode±0.5 micron	Connector: SC & FC Connectors	Type:Single mode
End Face: AS APC Step	ID:125μm NN/125.5μm/126μm FA	Flange : No Flange / APC Flange(Flange key width 1.35mm)

SC/FC APC SM APC ZIRCONIA FERRULE SC-APC and FC-APC
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron	Length Tolerance(No flange): 10.5 ±0.05mm	V-GROOVE: 60/90 ±5 degrees
Concentricity(standard):singlemode≤ 1 micron	Outer Diameter Tolerance: Singlemode±0.5 micron	Connector: SC & FC Connectors	Type:Single mode
End Face: AS APC Step	ID:125μm NN/125.5μm/126μm FA	Flange : No Flange / APC Flange(Flange key width 1.35mm)

SC/FC APC SM UPC ZIRCONIA FERRULE     SC-UPC and FC-UPC
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron	Length Tolerance(No flange): 10.5 ±0.05mm	V-GROOVE: 60/90 ±5 degrees
Concentricity(standard):singlemode≤ 1 micron	Outer Diameter Tolerance: Singlemode±0.5 micron	Spherlcel Radius (Pre-Dome):20+5/-10	Flange : No Flange /4 Slot Flange
Type:Singlemode End Face: Pre-Dome	Connector: SC & FC Connectors	ID:125μm NN/125.5μm/126μm FA

SC/FC APC SM UPC ZIRCONIA FERRULE     SC-UPC and FC-UPC
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron	Length Tolerance(No flange): 10.5 ±0.05mm	V-GROOVE: 60/90 ±5 degrees
Concentricity(standard):singlemode≤ 1 micron	Outer Diameter Tolerance: Singlemode±0.5 micron	Spherlcel Radius (Pre-Dome):20+5/-10	Flange : No Flange /4 Slot Flange
Type:Singlemode End Face: Pre-Dome	Connector: SC & FC Connectors	ID:125μm NN/125.5μm/126μm FA

SC/FC APC SM UPC ZIRCONIA FERRULE     SC-UPC and FC-UPC
Material: Zirconia	Inner Diameter Tolerance: Singlemode +4/-0 micron	Length Tolerance(No flange): 10.5 ±0.05mm	V-GROOVE: 60/90 ±5 degrees
Concentricity(standard):singlemode≤ 4  micron	Outer Diameter Tolerance: Singlemode±1 micron	Spherlcel Radius (Pre-Dome):20+5/-10	Flange : No Flange /4 Slot Flange
Type:Singlemode End Face: Pre-Dome	Connector: SC & FC Connectors	ID:127μm NN/144μm/230μm FA

SC/FC APC SM UPC ZIRCONIA FERRULE     SC-UPC and FC-UPC
Material: Zirconia	Inner Diameter Tolerance: Singlemode +4/-0 micron	Length Tolerance(No flange): 10.5 ±0.05mm	V-GROOVE: 60/90 ±5 degrees
Concentricity(standard):singlemode≤ 4  micron	Outer Diameter Tolerance: Singlemode±1 micron	Spherlcel Radius (Pre-Dome):20+5/-10	Flange : No Flange /4 Slot Flange
Type:Singlemode End Face: Pre-Dome	Connector: SC & FC Connectors	ID:127μm NN/144μm/230μm FA

ST SM/MM  ZIRCONIA FERRULE     ST Singlemode and Multimode
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron Multimode +4/-0 micron	Length Tolerance Singlemode 12.7+/-0.05 Multimode 12.70+/-0.1	V-GROOVE: 60/90 ±5 degrees Type: Singlemode
Concentricity(standard):singlemode≤1  micron Multimode ≤4  micron	Outer Diameter Tolerance: Singlemode±0.5 micron Multimode±1 micron	Spherlcel Radius (Pre-Dome):20+5/-10	Flange : No Flange /ST Flange
Connector: ST Connectors	End Face: Pre-Dome	ID:125μm NN/125.5μm/126μm FA

LC SM  ZIRCONIA  FERRULE     LC Singlemode
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron	Length Tolerance (No flange): 6.5±0.7mm	V-GROOVE: 60/90 ±5 degrees Type: Singlemode
Concentricity(standard):singlemode≤1  micron	Outer Diameter Tolerance: Singlemode±0.5 micron		Flange : No Flange /LC Flange
Connector: LC Connectors	End Face: Flat	ID:125μm NN/125.5μm/126μm FA

MU  SM  ZIRCONIA  FERRULE     MU Singlemode
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron	Length Tolerance (No flange): 10.5±0.05mm	V-GROOVE: 60/90 ±5 degrees Type: Singlemode
Concentricity(standard):singlemode≤1  micron	Outer Diameter Tolerance: Singlemode±0.5 micron		Flange : No Flange /MU Flange
Connector: MU Connectors	End Face: Flat	ID:125μm NN/125.5μm/126μm FA

LC  MM  ZIRCONIA  FERRULE     LC Multimode
Material: Zirconia	Inner Diameter Tolerance: Singlemode +4/-0 micron	Length Tolerance (No flange): 6.5±0.7mm	V-GROOVE: 60/90 ±5 degrees Type: Multimode
Concentricity(standard):singlemode≤4  micron	Outer Diameter Tolerance: Singlemode±1 micron		Flange : No Flange /LC Flange
Connector:LC Connectors	End Face: Flat	ID:127μm NN/144.5μm

MU  MM  ZIRCONIA  FERRULE    MU Multimode
Material: Zirconia	Inner Diameter Tolerance: Singlemode +4/-0 micron	Length Tolerance (No flange): 6.5±0.5mm	V-GROOVE: 60/90 ±5 degrees Type: Multimode
Concentricity(standard):singlemode≤4  micron	Outer Diameter Tolerance: Singlemode±1 micron		Flange : No Flange /MU Flange
Connector:MU Connectors	End Face: Flat	ID:127μm NN/144.5μm

6. Boot

fiber optical connector boot table