MU Kit Short Boot: 0.9mm Fiber Optic Connectors

The MU Kit Short Boot: 0.9mm Fiber Optic Connectors are used in the fiber optical communication filed because its good performance, these MU fiber Connectors are fully compatible with IEC 61 754-6 and suitable to use in fiber optic communication filed like CATV, LAN, SONET/SDH, ATM and WDM applications.

MU fiber optic connectors and related MU fiber products feature the small form design. MU fiber connector use 1.25mm pull-proof designed ferrule and the whole connector is with reduced footprint, size of the MU fiber optic connector is about half of the SC. MU connector is with square shape and push-pull mating mechanism.
Aminite supply a wide range of both simplex and duplex MU fiber optic connectors and related MU products including adapters, attenuators and cable assemblies. These MU fiber connectors represent the trend of the new generation fiber connectors to be smaller, thus they could fit for dense installations. Typical MU connectors commercially available in market include single mode MU/UPC fiber optic connector, single mode MU/APC fiber optic connector and multimode MU/UPC fiber optic connectors.

1. Application

• CATV
• LAN, MAN, WAN
• SONET/SDH
• ATM and WDM application
• industry, medical and sensors

2. Features

• With square shape and push-pull mating mechanism
• Ultra Low insertion and back reflection
• Small form factor, 50% of SC
• RoHS compliant

3. Compliance

• JIS and NTT compliant design
• UL94 V-0 rated plastic housing or metal housings available
• IEC 61 754-6

4. Specification

SPECIFICATION	Single Mode	Multi Mode
Insertion Loss	Typical≤0.15dB,Max≤0.25dB	Typical≤0.2dB,Max≤0.3dB
Return Loss	PC/UPC≥50dB,APC≥65dB	N/A
Durability	＜0.2dB Typical change,500 matings
Operating Temperature: -40 ℃ to + 75℃

5. Ferrule

SC/FC APC SM APC ZIRCONIA FERRULE SC-APC and FC-APC
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron	Length Tolerance(No flange): 10.5 ±0.05mm	V-GROOVE: 60/90 ±5 degrees
Concentricity(standard):singlemode≤ 1 micron	Outer Diameter Tolerance: Singlemode±0.5 micron	Connector: SC & FC Connectors	Type:Single mode
End Face: AS APC Step	ID:125μm NN/125.5μm/126μm FA	Flange : No Flange / APC Flange(Flange key width 1.35mm)

SC/FC APC SM APC ZIRCONIA FERRULE SC-APC and FC-APC
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron	Length Tolerance(No flange): 10.5 ±0.05mm	V-GROOVE: 60/90 ±5 degrees
Concentricity(standard):singlemode≤ 1 micron	Outer Diameter Tolerance: Singlemode±0.5 micron	Connector: SC & FC Connectors	Type:Single mode
End Face: AS APC Step	ID:125μm NN/125.5μm/126μm FA	Flange : No Flange / APC Flange(Flange key width 1.35mm)

SC/FC APC SM UPC ZIRCONIA FERRULE     SC-UPC and FC-UPC
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron	Length Tolerance(No flange): 10.5 ±0.05mm	V-GROOVE: 60/90 ±5 degrees
Concentricity(standard):singlemode≤ 1 micron	Outer Diameter Tolerance: Singlemode±0.5 micron	Spherlcel Radius (Pre-Dome):20+5/-10	Flange : No Flange /4 Slot Flange
Type:Singlemode End Face: Pre-Dome	Connector: SC & FC Connectors	ID:125μm NN/125.5μm/126μm FA

SC/FC APC SM UPC ZIRCONIA FERRULE     SC-UPC and FC-UPC
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron	Length Tolerance(No flange): 10.5 ±0.05mm	V-GROOVE: 60/90 ±5 degrees
Concentricity(standard):singlemode≤ 1 micron	Outer Diameter Tolerance: Singlemode±0.5 micron	Spherlcel Radius (Pre-Dome):20+5/-10	Flange : No Flange /4 Slot Flange
Type:Singlemode End Face: Pre-Dome	Connector: SC & FC Connectors	ID:125μm NN/125.5μm/126μm FA

SC/FC APC SM UPC ZIRCONIA FERRULE     SC-UPC and FC-UPC
Material: Zirconia	Inner Diameter Tolerance: Singlemode +4/-0 micron	Length Tolerance(No flange): 10.5 ±0.05mm	V-GROOVE: 60/90 ±5 degrees
Concentricity(standard):singlemode≤ 4  micron	Outer Diameter Tolerance: Singlemode±1 micron	Spherlcel Radius (Pre-Dome):20+5/-10	Flange : No Flange /4 Slot Flange
Type:Singlemode End Face: Pre-Dome	Connector: SC & FC Connectors	ID:127μm NN/144μm/230μm FA

SC/FC APC SM UPC ZIRCONIA FERRULE     SC-UPC and FC-UPC
Material: Zirconia	Inner Diameter Tolerance: Singlemode +4/-0 micron	Length Tolerance(No flange): 10.5 ±0.05mm	V-GROOVE: 60/90 ±5 degrees
Concentricity(standard):singlemode≤ 4  micron	Outer Diameter Tolerance: Singlemode±1 micron	Spherlcel Radius (Pre-Dome):20+5/-10	Flange : No Flange /4 Slot Flange
Type:Singlemode End Face: Pre-Dome	Connector: SC & FC Connectors	ID:127μm NN/144μm/230μm FA

ST SM/MM  ZIRCONIA FERRULE     ST Singlemode and Multimode
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron Multimode +4/-0 micron	Length Tolerance Singlemode 12.7+/-0.05 Multimode 12.70+/-0.1	V-GROOVE: 60/90 ±5 degrees Type: Singlemode
Concentricity(standard):singlemode≤1  micron Multimode ≤4  micron	Outer Diameter Tolerance: Singlemode±0.5 micron Multimode±1 micron	Spherlcel Radius (Pre-Dome):20+5/-10	Flange : No Flange /ST Flange
Connector: ST Connectors	End Face: Pre-Dome	ID:125μm NN/125.5μm/126μm FA

LC SM  ZIRCONIA  FERRULE     LC Singlemode
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron	Length Tolerance (No flange): 6.5±0.7mm	V-GROOVE: 60/90 ±5 degrees Type: Singlemode
Concentricity(standard):singlemode≤1  micron	Outer Diameter Tolerance: Singlemode±0.5 micron		Flange : No Flange /LC Flange
Connector: LC Connectors	End Face: Flat	ID:125μm NN/125.5μm/126μm FA

MU  SM  ZIRCONIA  FERRULE     MU Singlemode
Material: Zirconia	Inner Diameter Tolerance: Singlemode +1/-0 micron	Length Tolerance (No flange): 10.5±0.05mm	V-GROOVE: 60/90 ±5 degrees Type: Singlemode
Concentricity(standard):singlemode≤1  micron	Outer Diameter Tolerance: Singlemode±0.5 micron		Flange : No Flange /MU Flange
Connector: MU Connectors	End Face: Flat	ID:125μm NN/125.5μm/126μm FA

LC  MM  ZIRCONIA  FERRULE     LC Multimode
Material: Zirconia	Inner Diameter Tolerance: Singlemode +4/-0 micron	Length Tolerance (No flange): 6.5±0.7mm	V-GROOVE: 60/90 ±5 degrees Type: Multimode
Concentricity(standard):singlemode≤4  micron	Outer Diameter Tolerance: Singlemode±1 micron		Flange : No Flange /LC Flange
Connector:LC Connectors	End Face: Flat	ID:127μm NN/144.5μm

MU  MM  ZIRCONIA  FERRULE    MU Multimode
Material: Zirconia	Inner Diameter Tolerance: Singlemode +4/-0 micron	Length Tolerance (No flange): 6.5±0.5mm	V-GROOVE: 60/90 ±5 degrees Type: Multimode
Concentricity(standard):singlemode≤4  micron	Outer Diameter Tolerance: Singlemode±1 micron		Flange : No Flange /MU Flange
Connector:MU Connectors	End Face: Flat	ID:127μm NN/144.5μm

6. Boot

fiber optical connector boot table